RP5 30 m + Cable pulling loop with hook - set of 4 for pipes from 14 mm inner diameter and non-guided lines

The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool without a meter counter. The triple-twisted special plastic tape Ø 5.5 mm has an even better thrust effect than the glass fiber rod Ø 3 mm, and the frictional resistance is only half as great due to its point contact. The patented RG7 guiding head with swivel compensation Ø 5.5 mm (pressed at the beginning and end of the tape) enables the tightest radii to be overcome (bending radius 15 mm). The RP5 RUNPOTEC polyester Ø 5.5 mm is stored in a storage box suitable for construction sites, including a reverse thrust safety device (only stops the RG7 guiding head). The total breaking load of an incredible 270 kg refers to the entire pulling system. Labor-intensive and time-consuming repair work is no longer necessary, as the cable pulling system is virtually break-free. The RP5 can be stored in a very practical box in lengths of 20 m and 30 m. The RP5 replacement tape 40 m cannot be stored in the box.
Optimal application: for raw inner diameters of Ø 9 mm - 32 mm.
+
Cable pulling loop with protective cap and hook. Flexible loop made of stainless steel with a diameter of 1.5 mm. Easy attachment of cables to the loop. The protective cap allows cables with plugs to be pulled through pipes or other situations. The hook allows the cable pulling loops to be attached to all products with RG RUNPOGLEITER (guiding head) (RP5, RP1, etc.). Also ideal for attaching or pulling several cables together.
Optimal application: From 14 mm inner diameter and non-guided cables
Scope of delivery 1 x RP5 cable pulling tape Ø 5.5 mm without meter counter in plastic box, length: 30 m, incl. 2 x RG7 RUNPOGLEITER with swivel compensation (pressed on both sides), cable pulling loop set of 4 with hooks: 1 x protective cap outer Ø 14 mm, 1 protective cap, outer diameter 17 mm, 1 x protective cap, outer diameter 23 mm, 1 x protective cap, outer diameter 30 mm
Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com.
Scope of supply: 1 x RP5 cable pulling tape Ø 5,5 mm without meter counter in a plastic box, length: 30 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides), Cable pulling loop with hook set of 4: 1 x protective cap outer Ø 14 mm, 1 x protective cap outer Ø 17 mm, 1 x protective cap outer Ø 23 mm, 1 x protective cap outer Ø 30 mm