RP5 cable pulling tool without digital meter counter optimal for pipe inner diameter 9 mm - 32 mm
Description
| The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool that includes a digital meter counter (for measuring the length of pipes/cables or for creating cable lists). The triple-twisted special plastic tape Ø 5.5 mm provides even better thrust than the Ø 3 mm fiberglass rod, and its friction resistance is only half as great due to its point-contact design. The patented RG7 guide tip with twist compensation (Ø 5.5 mm, crimped at the start and end of the tape) allows for navigating the tightest radii (bending radius 15 mm). The RP5 - RUNPOTEC Polyester (Ø 5.5 mm) is stored in a robust, construction-site-ready storage box with an ergonomic carrying handle. This box is equipped with the new anti-retraction device (stops only the RG7 guide tip), which prevents the cable pulling tape from accidentally slipping back. The meter counter’s unit of measurement can be switched from metric (m) to imperial (ft). The total breaking load of an incredible 270 kg applies to the entire pulling system. Labor-intensive and time-consuming repair work is eliminated, as this cable pulling system is virtually break-free. The RP5 can be stored in a very practical box in lengths of 20 m and 30 m. The 40 m RP5 replacement tape cannot be stored in the box. Optimal application: for pipe inner diameters of 9–32 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 20 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides) |
Technical data
| Dimensions: | 45x315x395 mm |
| Length: | 20 Meter |
| Bending radius: | 15 mm |
| Recommended tube-Ø: | 16-40 mm |
| Weight: | 1,36 kg |
| Total tension load: | 270 kg |
| Material: | triple twisted special plastic tape |
| Ø Rod: | 5,5 mm |
| EAN-Code: | 9120045472806 |
Scope of supply
1 x RP5 cable pulling tape Ø 5,5 mm in a plastic box, length: 20 m, including 2 x RG7 RUNPOGLIDER with swivel (pressed on both sides)
