The capstan head is made of high-strength aluminum with special coating. The diameter of 55 mm allows a drawing speed of 8 m/min with a maximum load of 800 kg. The capstan head can be easily fixed or changed via the centred fixing screw. The best utilization in the application is achieved with the highest possible wrap of the pulling rope around the capstan head. The CW800E capstan winch is approved for horizontal cable pulling.
Application film: a short, very informative application film can be viewed by scanning the QR code or at www.RUNPOTEC.com.
Scope of supply: 1 x Capstan head DM 55 mm incl. fixing screw
|Dimensiones:||75 mm x 75 mm x 100 mm|
|Tensión total de carga:||400 kg|
|Material:||Higth strength aluminium|