RP5 cable pulling tool incl. digital meter counter optimal for pipe inner diameter 9 mm - 32 mm
Description
The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool with digital meter counter. (For determining the length of pipes/cables or for creating cable lists.)
The triple-twisted special plastic tape with a diameter of 5.5 mm has an even better shearing effect than the 3 mm fiberglass rod; the frictional resistance is only half the normal value due to spot contact. The patented RG7 guiding head with swivel Ø 5.5 mm (pressed at the beginning and end of the tape) allows overcoming tight radii (bending radius 15 mm). The RP5 - RUNPOTEC Polyester Ø 5.5 mm is stored in a jobsite suitable and robust storage box with an ergonomic carrying handle. It is equipped with the new glide back protection, which prevents the cable pulling strap from slipping back accidentally. The unit of measurement of the metre counter can be changed from metric (m) to imperial (ft). The incredible total breaking load of 270 kg refers to the entire pulling system. Labour- and time-consuming repair work is no longer necessary, as this cable pulling system is virtually breakage-free. The RP5 is available in 20m and 30 m lengths. The RP5 replacement strap cannot be stored in the box.
Optimal field of application: for pipe inner diameter 9 - 32 mm
Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com.
Scope of supply: 1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 20 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides)
The triple-twisted special plastic tape with a diameter of 5.5 mm has an even better shearing effect than the 3 mm fiberglass rod; the frictional resistance is only half the normal value due to spot contact. The patented RG7 guiding head with swivel Ø 5.5 mm (pressed at the beginning and end of the tape) allows overcoming tight radii (bending radius 15 mm). The RP5 - RUNPOTEC Polyester Ø 5.5 mm is stored in a jobsite suitable and robust storage box with an ergonomic carrying handle. It is equipped with the new glide back protection, which prevents the cable pulling strap from slipping back accidentally. The unit of measurement of the metre counter can be changed from metric (m) to imperial (ft). The incredible total breaking load of 270 kg refers to the entire pulling system. Labour- and time-consuming repair work is no longer necessary, as this cable pulling system is virtually breakage-free. The RP5 is available in 20m and 30 m lengths. The RP5 replacement strap cannot be stored in the box.
Optimal field of application: for pipe inner diameter 9 - 32 mm
Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com.
Scope of supply: 1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 20 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides)
Caractéristiques techniques
| Longueur: | 20 m |
| Rayon de courbure: | 15 |
| De charge de traction: | 270 kg |
| Diamètre de tube recommandé: | 16-40 mm |
| Autres caractéristiques: | inkl. Meterzähler |
| EAN-Code: | 9120045477573 |
Fournitures
1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 20 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides)
